DW=1BIT, DMASEL=SDMA, HSEN=NORMAL, LEDCTRL=OFF, CARDDSEL=NORMAL, CARDDTL=NO
Host Control 1
| LEDCTRL | LED Control 0 (OFF): LED off 1 (ON): LED on |
| DW | Data Width 0 (1BIT): 1-bit mode 1 (4BIT): 4-bit mode |
| HSEN | High Speed Enable 0 (NORMAL): Normal Speed mode 1 (HIGH): High Speed mode |
| DMASEL | DMA Select 0 (SDMA): SDMA is selected 2 (32BIT): 32-bit Address ADMA2 is selected |
| CARDDTL | Card Detect Test Level 0 (NO): No Card 1 (YES): Card Inserted |
| CARDDSEL | Card Detect Signal Selection 0 (NORMAL): SDCD# is selected (for normal use) 1 (TEST): The Card Select Test Level is selected (for test purpose) |